c语言实现扫雷

❶ c语言编简单的扫雷

给你一个完整的扫雷源码
#include <conio.h>
#include <graphics.h>
#include <stdio.h>
#include <stdlib.h>
#include <time.h>
#include <ctype.h>
#include "mouse.c"

#define YES 1
#define NO 0

#define XPX 15 /* X pixels by square */
#define YPX 15 /* Y pixels by square */

#define DEFCX 30 /* Default number of squares */
#define DEFCY 28

#define MINE 255-'0' /* So that when it prints, it prints char 0xff */

#define STSQUARE struct stsquare

STSQUARE {
unsigned char value; /* Number of mines in the surround squares */
unsigned char sqopen; /* Square is open */
unsigned char sqpress; /* Square is pressed */
unsigned char sqmark; /* Square is marked */
} *psquare;

#define value(x,y) (psquare+(x)*ncy+(y))->value
#define sqopen(x,y) (psquare+(x)*ncy+(y))->sqopen
#define sqpress(x,y) (psquare+(x)*ncy+(y))->sqpress
#define sqmark(x,y) (psquare+(x)*ncy+(y))->sqmark

int XST, /* Offset of first pixel X */
YST,
ncx, /* Number of squares in X */
ncy,
cmines, /* Mines discovered */
initmines, /* Number of initial mines */
sqclosed, /* Squares still closed */
maxy; /* Max. number of y pixels of the screen */

void Graph_init(void);
void Read_param(int argc, char *argv[]);
void Set_mines(int nminas);
void Set_square(int x, int y, int status);
void Mouse_set(void);
void Draw_squares(void);
int Do_all(void);
void Blow_up(void);
void Open_square(int x, int y);
int Open_near_squares(int x, int y);

/************************************************************************/

void main(int argc, char *argv[])
{
if (!mouse_reset()) {
cputs(" ERROR: I can't find a mouse driver\r\n");
exit(2);
}
Graph_init();
Read_param(argc, argv);
Mouse_set();
do {
randomize();
cleardevice();
Set_mines(cmines=initmines);
mouse_enable();
Draw_squares();
}
while (Do_all() != '\x1b');
closegraph();
}

/*************************************************************************
* *
* F U N C T I O N S *
* *
*************************************************************************/

/*----------------------------------------------------------------------*/

void Graph_init(void)
{
int graphdriver=DETECT, graphmode, errorcode;

if(errorcode < 0) {
cprintf("\n\rGraphics System Error: %s\n",grapherrormsg(errorcode));
exit(98);
}
initgraph(&graphdriver, &graphmode, "");
errorcode=graphresult();
if(errorcode!=grOk) {
printf(" Graphics System Error: %s\n",grapherrormsg(errorcode));
exit(98);
}
maxy=getmaxy();
} /* Graph_init */

/*----------------------------------------------------------------------*/

void Read_param(int argc, char *argv[])
{
int x, y, m;

x=y=m=0;
if (argc!=1) {
if (!isdigit(*argv[1])) {
closegraph();
cprintf("Usage is: %s [x] [y] [m]\r\n\n"
"Where x is the horizontal size\r\n"
" y is the vertical size\r\n"
" m is the number of mines\r\n\n"
" Left mouse button: Open the square\r\n"
"Right mouse button: Mark the square\r\n"
" -The first time puts a 'mine' mark\r\n"
" -The second time puts a 'possible "
"mine' mark\r\n"
" -The third time unmarks the square\r\n"
"Left+Right buttons: Open the surrounded squares only if "
"the count of mines\r\n"
" is equal to the number in the square",argv[0]);
exit (1);
}
switch (argc) {
case 4: m=atoi(argv[3]);
case 3: y=atoi(argv[2]);
case 2: x=atoi(argv[1]);
}
}
XST=100;
ncx=DEFCX;
if (maxy==479) {
YST=30;
ncy=DEFCY;
}
else {
YST=25;
ncy=20;
}
if (x>0 && x<ncx)
ncx=x;
if (y>0 && y<ncy) {
YST+=((ncy-y)*YPX)>>1;
ncy=y;
}
initmines= m ? m : ncx*ncy*4/25; /* There are about 16% of mines */
if (((void near*)psquare=calloc(ncx*ncy, sizeof(STSQUARE)))==NULL) {
closegraph();
cputs("ERROR: Not enought memory");
exit(3);
}
} /* Read_param */

/*----------------------------------------------------------------------*/

void Set_mines(int nminas)
{

❷ 如何用C语言编程 扫雷！~

C语言模拟扫雷的代码如下：

#include<stdio.h>
#include<time.h>
#include<stdlib.h>
int map[9][9] = {0};
int result[9][9] = {0};
int mine[10][2];

bool Check(int i)
{
int j;
for(j=0;j<i;j++)
if(mine[j][0] == mine[i][0] && mine[j][1] == mine[i][0]) return true;
return false;
}

int MineNum(int x,int y) //这个函数计算坐标(x,y)周围地雷的数目
{
int sum = 0;
int i,j;
if(x-1>=0 && x+1<=8 && y-1>=0 && y+1<=8)
{//中间位置
for(i=x-1;i<=x+1;i++)
for(j=y-1;j<=y+1;j++) sum += map[i][j];
return (sum-map[x][y])/9;
}
if(x==0 && y==0) return (map[0][1]+map[1][0]+map[1][1])/9; //左上角
if(x==0 && y==8) return (map[0][7]+map[1][7]+map[1][8])/9; //右上角
if(x==8 && y==0) return (map[7][0]+map[7][1]+map[8][1])/9; //左下角
if(x==8 && y==8) return (map[7][7]+map[7][8]+map[8][7])/9; //右上角
if(x==0)
{//上边界
for(i=x;i<=x+1;i++)
for(j=y-1;j<=y+1;j++) sum += map[i][j];
return (sum-map[x][y])/9;
}
if(x==8)
{//下边界
for(i=x-1;i<=x;i++)
for(j=y-1;j<=y+1;j++) sum += map[i][j];
return (sum-map[x][y])/9;
}
if(y==0)
{//左边界
for(i=x-1;i<=x+1;i++)
for(j=y;j<=y+1;j++) sum += map[i][j];
return (sum-map[x][y])/9;
}
if(y==8)
{//右边界
for(i=x-1;i<=x+1;i++)
for(j=y-1;j<=y;j++) sum += map[i][j];
return (sum-map[x][y])/9;
}
}

void main()
{
int i,j,x,y;
srand((int)time(0));
for(i=0;i<10;i++)
{
do{
mine[i][0] = rand()%9;
mine[i][1] = rand()%9;
}while(Check(i));
printf("%d\t%d\n",mine[i][0],mine[i][1]);
}

//标识地雷
for(i=0;i<10;i++) map[mine[i][0]][mine[i][1]] = 9;

//计算地雷的数目
for(i=0;i<9;i++)
{
for(j=0;j<9;j++)
{
if(map[i][j] == 9) result[i][j] = 9;
else result[i][j] = MineNum(i,j);
printf("%d ",result[i][j]);
}
printf("\n");
}
}

❸ c语言扫雷，使用一维数组实现对9*9区域进行随机布雷

intmine[N*N],i,c;
for(c=0;c<10;c++)
{
i=rand()%(N*N);
if(mine[i]==0)mine[i]=1;
elsec--;
}

❹ c程序编程扫雷

希望对你有帮助！
#include <graphics.h>
#include <stdlib.h>
#include <dos.h>
#define LEFTPRESS 0xff01
#define LEFTCLICK 0xff10
#define LEFTDRAG 0xff19
#define MOUSEMOVE 0xff08
int num[10][10];/*范围*/
int p[10][10];/*统计雷的数组*/
int loop;/*重新来的标志*/
int again=0;/*是否重来的变量*/
int scorenum;/*一开始统计有几个雷*/
char score[3];/*输出一共有几个地雷*/
int Keystate;
int MouseExist;
int MouseButton;
int MouseX;
int MouseY;
/*鼠标光标形状定义*/
typedef struct
{
unsigned int shape[32];
char hotx;
char hoty;
}SHAPE;

/*箭头型*/
SHAPE ARROW={
{
0x3fff,0x1fff,0x0fff,0x07ff,
0x03ff,0x01ff,0x00ff,0x007f,
0x003f,0x00ff,0x01ff,0x10ff,
0x30ff,0xf87f,0xf87f,0xfc3f,
0x0000,0x7c00,0x6000,0x7000,
0x7800,0x7c00,0x7e00,0x7f00,
0x7f80,0x7e00,0x7c00,0x4600,
0x0600,0x0300,0x0300,0x0180
},
0,0,
};

/*鼠标光标显示*/
void MouseOn()
{
_AX=0x01;
geninterrupt(0x33);
}

/*鼠标光标掩示*/
void MouseOff()/*鼠标光标隐藏*/
{
_AX=0x02;
geninterrupt(0x33);
}
void MouseSetXY(int x,int y)/*设置当前位置*/
{
_CX=x;
_DX=y;
_AX=0x04;
geninterrupt(0x33);
}
int LeftPress()/*左键按下*/
{
_AX=0x03;
geninterrupt(0x33);
return(_BX&1);
}
void MouseGetXY()/*得到当前位置*/
{
_AX=0x03;
geninterrupt(0x33);
MouseX=_CX;
MouseY=_DX;
}
begain()/*游戏开始画面*/
{
int i,j;
loop: cleardevice();
MouseOn();
MouseSetXY(180,30);
MouseX=180;
MouseY=30;
scorenum=0;
setfillstyle(SOLID_FILL,7);
bar(190,60,390,290);
setfillstyle(SOLID_FILL,8);
for(i=100;i<300;i+=20)/*画格子*/
for(j=200;j<400;j+=20)
bar(j-8,i+8,j+8,i-8);
setcolor(7);
setfillstyle(SOLID_FILL,YELLOW);/*画脸*/
fillellipse(290,75,10,10);
setcolor(YELLOW);
setfillstyle(SOLID_FILL,0);
fillellipse(285,75,2,2);
fillellipse(295,75,2,2);
setcolor(0);
bar(287,80,293,81);
randomize();
for(i=0;i<10;i++)
for(j=0;j<10;j++)
{
num[i][j]=random(7)+10;/*用10代表地雷算了*/
if(num[i][j]==10)
scorenum++;
}
sprintf(score,"%d",scorenum);
setcolor(1);
settextstyle(0,0,2);
outtextxy(210,70,score);
scorenum=100-scorenum;/*为了后面判断胜利*/
}
gameove()/*游戏结束画面*/
{
int i,j;
setcolor(0);
for(i=0;i<10;i++)
for(j=0;j<10;j++)
if(num[i][j]==10)/*是地雷的就显示出来*/
{
setfillstyle(SOLID_FILL,RED);
bar(200+j*20-8,100+i*20-8,200+j*20+8,100+i*20+8);
setfillstyle(SOLID_FILL,0);
fillellipse(200+j*20,100+i*20,7,7);
}
}
int tongji(int i,int j)/*计算有几个雷*/
{
int x=0;/*10代表地雷*/
if(i==0&&j==0)
{
if(num[0][1]==10)
x++;
if(num[1][0]==10)
x++;
if(num[1][1]==10)
x++;
}
else if(i==0&&j==9)
{
if(num[0][8]==10)
x++;
if(num[1][9]==10)
x++;
if(num[1][8]==10)
x++;
}
else if(i==9&&j==0)
{
if(num[8][0]==10)
x++;
if(num[9][1]==10)
x++;
if(num[8][1]==10)
x++;
}
else if(i==9&&j==9)
{
if(num[9][8]==10)
x++;
if(num[8][9]==10)
x++;
if(num[8][8]==10)
x++;
}
else if(j==0)
{
if(num[i][j+1]==10)
x++;
if(num[i+1][j]==10)
x++;
if(num[i-1][j]==10)
x++;
if(num[i-1][j+1]==10)
x++;
if(num[i+1][j+1]==10)
x++;
}
else if(j==9)
{
if(num[i][j-1]==10)
x++;
if(num[i+1][j]==10)
x++;
if(num[i-1][j]==10)
x++;
if(num[i-1][j-1]==10)
x++;
if(num[i+1][j-1]==10)
x++;
}
else if(i==0)
{
if(num[i+1][j]==10)
x++;
if(num[i][j-1]==10)
x++;
if(num[i][j+1]==10)
x++;
if(num[i+1][j-1]==10)
x++;
if(num[i+1][j+1]==10)
x++;
}
else if(i==9)
{
if(num[i-1][j]==10)
x++;
if(num[i][j-1]==10)
x++;
if(num[i][j+1]==10)
x++;
if(num[i-1][j-1]==10)
x++;
if(num[i-1][j+1]==10)
x++;
}
else
{
if(num[i-1][j]==10)
x++;
if(num[i-1][j+1]==10)
x++;
if(num[i][j+1]==10)
x++;
if(num[i+1][j+1]==10)
x++;
if(num[i+1][j]==10)
x++;
if(num[i+1][j-1]==10)
x++;
if(num[i][j-1]==10)
x++;
if(num[i-1][j-1]==10)
x++;
}
return(x);
}
funcheck(int i,int j)/*开始找无雷*/
{
scorenum--;
if(p[i][j]==0&&num[i][j]!=10)
{
setfillstyle(SOLID_FILL,7);/*显示无雷区*/
bar(200+j*20-7,100+i*20-7,200+j*20+7,100+i*20+7);
num[i][j]=-1;
}
else if(p[i][j]!=0)
{
sprintf(score,"%d",p[i][j]);/*输出雷数*/
setcolor(RED);
outtextxy(195+j*20,95+i*20,score);
num[i][j]=-1;
return ;
}
if(i!=0&&num[i-1][j]!=-1&&num[i-1][j]!=10)/*第归开始*/
funcheck(i-1,j);
if(i!=0&&j!=9&&num[i-1][j+1]!=-1&&num[i-1][j+1]!=10)
funcheck(i-1,j+1);
if(j!=9&&num[i][j+1]!=-1&&num[i][j+1]!=10)
funcheck(i,j+1);
if(j!=9&&i!=9&&num[i+1][j+1]!=-1&&num[i+1][j+1]!=10)
funcheck(i+1,j+1);
if(i!=9&&num[i+1][j]!=-1&&num[i+1][j]!=10)
funcheck(i+1,j);
if(i!=9&&j!=0&&num[i+1][j-1]!=-1&&num[i+1][j-1]!=10)
funcheck(i+1,j-1);
if(j!=0&&num[i][j-1]!=-1&&num[i][j-1]!=10)
funcheck(i,j-1);
if(i!=0&&j!=0&&num[i-1][j-1]!=-1&&num[i-1][j-1]!=10)
funcheck(i-1,j-1);
}

playgame()/*游戏过程*/
{int i,j,numx;
for(i=0;i<10;i++)
for(j=0;j<10;j++)
p[i][j]=tongji(i,j);/*把标记有几个雷的数字都存放起来*/
while(!kbhit())
{
if(LeftPress())/*左键盘按下*/
{
MouseGetXY();
if(MouseX>280&&MouseX<300&&MouseY>65&&MouseY<85)/*重新来*/
{
MouseOff();
again=1;
break;
}
if(MouseX>190&&MouseX<390&&MouseY>90&&MouseY<290)/*是否在游戏范围内*/
{
j=(MouseX-190)/20;/*x坐标*/
i=(MouseY-90)/20;/*y坐标*/
if(num[i][j]!=-1)
{
if(num[i][j]==10)/*中雷*/
{
MouseOff();
gameove();/*失败*/
break;
}
else/*非中雷*/
{
MouseOff();
numx=tongji(i,j);
if(numx==0)/*周围没地雷*/
funcheck(i,j);/*开始找无雷*/
else/*有地雷*/
{
sprintf(score,"%d",numx);/*输出雷数*/
setcolor(RED);
outtextxy(195+j*20,95+i*20,score);
scorenum--;
}
MouseOn();
num[i][j]=-1;
if(scorenum<1)/*胜利了*/
{
setcolor(11);
settextstyle(0,0,2);
outtextxy(230,30,"YOU WIN!");
break;
}
}
}
}
}
}
}
main()
{int gd=DETECT,gr;
registerbgidriver(EGAVGA_driver);
initgraph(&gd,&gr,"c:\\tc");
loop: begain();
playgame();/*具体游戏*/
if(again)/*游戏中重新开始*/
{
again=0;
goto loop;
}
MouseOn();
while(!kbhit())/*重新来*/
{
if(LeftPress())
{
MouseGetXY();/*失败后重新来*/
if(MouseX>280&&MouseX<300&&MouseY>65&&MouseY<85)
goto loop;
}
}
MouseOff();
closegraph();
}

本文来自: 中科软件园(www.4oa.com) 详细出处参考：http://www.4oa.com/Article/html/6/31/446/2005/15615.html

❺ 能不能帮忙用C语言编写一个扫雷程序，优质一点的

#include <stdio.h>
#define N 40

int a[N][2];
int num;

//输入数据：1 2 3 2 2 2 2
//输出数据：0 1 1 1 0 1 1

//此函数为输出数据
void display()
{
for(int j=0; j < num; j++)
{
printf("%d ", a[j][1]);
}
printf("\n");
}

//此函数从第一个开始判断，如果输出为0（预设值都是为0的）则可以更改为1
void test(int i)
{
if(i == num)//if函数判断i对应的是否是最后一个数
int j;
int flag = 1;
//下面的if函数和for函数判断是否所有数字满足条件，如果满足条件则输出
if(a[0][1]+a[1][1]!=a[0][0]&&a[num-1][1]+a[num-2][1]!=a[num-1][0])
{
flag = 0;
}
for(j = 1; j < num - 1; j++)
{
if(a[j-1][1] + a[j][1] + a[j+1][1] != a[j][0])
flag = 0;
}
if(flag)
display();
}

//输出数据：0 1 1 1 0 1 1
//此for函数从第一个输出数据开始，如果为0则把它置1进行回溯，求出最后答案
for(; i < num; i++)
{
if(a[i][1] == 0)
{
if(i == 0)
{
if(a[i][1]+a[i+1][1] != a[i][0])
{
a[i][1] = 1;
test(i+1);
a[i][1] = 0;
}
}
if(i > 0)
{
if(a[i-1][1] + a[i][1] + a[i+1][1] != a[i][0])
{
a[i][1] = 1;
test(i+1);
a[i][1] = 0;
}

}
}
}

}

int main()
{

int i;
printf("输入个数：\n");
scanf("%d",&num);
printf("输入数据(0~3)：\n");
for(i = 0; i < num; i++)
{
scanf("%d",&a[i][0]);
a[i][1]=0;//将输出预设为0
}
for(i = 1; i < num - 1; i++)//for函数将为3的对应输出为全部置1
{
if(a[i][0] == 3)
{
a[i-1][1] = 1;
a[i][1] = 1;
a[i+1][1] = 1;
}
}

test(0);

}

❻ C语言 扫雷

#include<stdio.h>
intmain(void)
{
charplat[100][100];//雷的地图
charplat_new[100][100];//数字映射图
intn,m;//存储行、列数
intin,im;
intmark=0;//记录该点附近8个坐标雷的总数
intj=1;

scanf("%d%d",&n,&m);
getchar();//消除回车符的影响

do{
if(n==0&&m==0)
break;

for(in=0;in<n;in++)
{
for(im=0;im<m;im++)
{
scanf("%c",&plat[in][im]);
}
getchar();
}

for(in=0;in<n;in++)
for(im=0;im<m;im++)
{
if(plat[in][im]=='*')/*该点有雷，无需检测*/
{
plat_new[in][im]=plat[in][im];
continue;
}

if(in-1>=0)//检测上面3个点的雷数
{
if(plat[in-1][im]=='*')
mark++;

if(im-1>=0&&plat[in-1][im-1]=='*')
mark++;

if(im+1<m&&plat[in-1][im+1]=='*')
mark++;
}

if(im-1>=0&&plat[in][im-1]=='*')//检测左右两个点的雷数
mark++;
if(im+1<m&&plat[in][im+1]=='*')
mark++;

if(in+1<n)//检测下面3个点的雷数
{
if(plat[in+1][im]=='*')
mark++;

if(im-1>=0&&plat[in+1][im-1]=='*')
mark++;

if(im+1<m&&plat[in+1][im+1]=='*')
mark++;
}

switch(mark)
{
case0:plat_new[in][im]='0';break;
case1:plat_new[in][im]='1';break;
case2:plat_new[in][im]='2';break;
case3:plat_new[in][im]='3';break;
case4:plat_new[in][im]='4';break;
case5:plat_new[in][im]='5';break;
case6:plat_new[in][im]='6';break;
case7:plat_new[in][im]='7';break;
case8:plat_new[in][im]='8';break;
}
mark=0;//重置雷数
}
if(j!=1)
putchar('
');
printf("Field#%d:
",j);

for(in=0;in<n;in++)//打印数字地图
{
for(im=0;im<m;im++)
{
printf("%c",plat_new[in][im]);
}
if(in!=n-1)
putchar('
');
}
scanf("%d%d",&n,&m);
getchar();
j++;
}while(1);
return0;
}

❼ 急求用c语言编写扫雷详细代码

/*5.3.4 源程序*/
#include <graphics.h>
#include <stdlib.h>
#include <dos.h>
#define LEFTPRESS 0xff01
#define LEFTCLICK 0xff10
#define LEFTDRAG 0xff19
#define MOUSEMOVE 0xff08
struct
{
int num;/*格子当前处于什么状态,1有雷，0已经显示过数字或者空白格子*/
int roundnum;/*统计格子周围有多少雷*/
int flag;/*右键按下显示红旗的标志,0没有红旗标志,1有红旗标志*/
}Mine[10][10];
int gameAGAIN=0;/*是否重来的变量*/
int gamePLAY=0;/*是否是第一次玩游戏的标志*/
int mineNUM;/*统计处理过的格子数*/
char randmineNUM[3];/*显示数字的字符串*/
int Keystate;
int MouseExist;
int MouseButton;
int MouseX;
int MouseY;
void Init(void);/*图形驱动*/
void MouseOn(void);/*鼠标光标显示*/
void MouseOff(void);/*鼠标光标隐藏*/
void MouseSetXY(int,int);/*设置当前位置*/
int LeftPress(void);/*左键按下*/
int RightPress(void);/*鼠标右键按下*/
void MouseGetXY(void);/*得到当前位置*/
void Control(void);/*游戏开始,重新,关闭*/
void GameBegain(void);/*游戏开始画面*/
void DrawSmile(void);/*画笑脸*/
void DrawRedflag(int,int);/*显示红旗*/
void DrawEmpty(int,int,int,int);/*两种空格子的显示*/
void GameOver(void);/*游戏结束*/
void GameWin(void);/*显示胜利*/
int MineStatistics(int,int);/*统计每个格子周围的雷数*/
int ShowWhite(int,int);/*显示无雷区的空白部分*/
void GamePlay(void);/*游戏过程*/
void Close(void);/*图形关闭*/
void main(void)
{
Init();
Control();
Close();
}
void Init(void)/*图形开始*/
{
int gd=DETECT,gm;
initgraph(&gd,&gm,"c:\\tc");
}
void Close(void)/*图形关闭*/
{
closegraph();
}
void MouseOn(void)/*鼠标光标显示*/
{
_AX=0x01;
geninterrupt(0x33);
}
void MouseOff(void)/*鼠标光标隐藏*/
{
_AX=0x02;
geninterrupt(0x33);
}
void MouseSetXY(int x,int y)/*设置当前位置*/
{
_CX=x;
_DX=y;
_AX=0x04;
geninterrupt(0x33);
}
int LeftPress(void)/*鼠标左键按下*/
{
_AX=0x03;
geninterrupt(0x33);
return(_BX&1);
}
int RightPress(void)/*鼠标右键按下*/
{
_AX=0x03;
geninterrupt(0x33);
return(_BX&2);
}
void MouseGetXY(void)/*得到当前位置*/
{
_AX=0x03;
geninterrupt(0x33);
MouseX=_CX;
MouseY=_DX;
}
void Control(void)/*游戏开始,重新,关闭*/
{
int gameFLAG=1;/*游戏失败后判断是否重新开始的标志*/
while(1)
{
if(gameFLAG)/*游戏失败后没判断出重新开始或者退出游戏的话就继续判断*/
{
GameBegain(); /*游戏初始画面*/
GamePlay();/*具体游戏*/
if(gameAGAIN==1)/*游戏中重新开始*/
{
gameAGAIN=0;
continue;
}
}
MouseOn();
gameFLAG=0;
if(LeftPress())/*判断是否重新开始*/
{
MouseGetXY();
if(MouseX>280&&MouseX<300&&MouseY>65&&MouseY<85)
{
gameFLAG=1;
continue;
}
}
if(kbhit())/*判断是否按键退出*/
break;
}
MouseOff();
}
void DrawSmile(void)/*画笑脸*/
{
setfillstyle(SOLID_FILL,YELLOW);
fillellipse(290,75,10,10);
setcolor(YELLOW);
setfillstyle(SOLID_FILL,BLACK);/*眼睛*/
fillellipse(285,75,2,2);
fillellipse(295,75,2,2);
setcolor(BLACK);/*嘴巴*/
bar(287,80,293,81);
}
void DrawRedflag(int i,int j)/*显示红旗*/
{
setcolor(7);
setfillstyle(SOLID_FILL,RED);
bar(198+j*20,95+i*20,198+j*20+5,95+i*20+5);
setcolor(BLACK);
line(198+j*20,95+i*20,198+j*20,95+i*20+10);
}
void DrawEmpty(int i,int j,int mode,int color)/*两种空格子的显示*/
{
setcolor(color);
setfillstyle(SOLID_FILL,color);
if(mode==0)/*没有单击过的大格子*/
bar(200+j*20-8,100+i*20-8,200+j*20+8,100+i*20+8);
else
if(mode==1)/*单击过后显示空白的小格子*/
bar(200+j*20-7,100+i*20-7,200+j*20+7,100+i*20+7);
}
void GameBegain(void)/*游戏开始画面*/
{
int i,j;
cleardevice();
if(gamePLAY!=1)
{
MouseSetXY(290,70); /*鼠标一开始的位置,并作为它的初始坐标*/
MouseX=290;
MouseY=70;
}
gamePLAY=1;/*下次按重新开始的话鼠标不重新初始化*/
mineNUM=0;
setfillstyle(SOLID_FILL,7);
bar(190,60,390,290);
for(i=0;i<10;i++)/*画格子*/
for(j=0;j<10;j++)
DrawEmpty(i,j,0,8);
setcolor(7);
DrawSmile();/*画脸*/
randomize();
for(i=0;i<10;i++)/*100个格子随机赋值有没有地雷*/
for(j=0;j<10;j++)
{
Mine[i][j].num=random(8);/*如果随机数的结果是1表示这个格子有地雷*/
if(Mine[i][j].num==1)
mineNUM++;/*现有雷数加1*/
else
Mine[i][j].num=2;
Mine[i][j].flag=0;/*表示没红旗标志*/
}
sprintf(randmineNUM,"%d",mineNUM); /*显示这次总共有多少雷数*/
setcolor(1);
settextstyle(0,0,2);
outtextxy(210,70,randmineNUM);
mineNUM=100-mineNUM;/*变量取空白格数量*/
MouseOn();
}
void GameOver(void)/*游戏结束画面*/
{
int i,j;
setcolor(0);
for(i=0;i<10;i++)
for(j=0;j<10;j++)
if(Mine[i][j].num==1)/*显示所有的地雷*/
{
DrawEmpty(i,j,0,RED);
setfillstyle(SOLID_FILL,BLACK);
fillellipse(200+j*20,100+i*20,7,7);
}
}
void GameWin(void)/*显示胜利*/
{
setcolor(11);
settextstyle(0,0,2);
outtextxy(230,30,"YOU WIN!");
}
int MineStatistics(int i,int j)/*统计每个格子周围的雷数*/
{
int nNUM=0;
if(i==0&&j==0)/*左上角格子的统计*/
{
if(Mine[0][1].num==1)
nNUM++;
if(Mine[1][0].num==1)
nNUM++;
if(Mine[1][1].num==1)
nNUM++;
}
else
if(i==0&&j==9)/*右上角格子的统计*/
{
if(Mine[0][8].num==1)
nNUM++;
if(Mine[1][9].num==1)
nNUM++;
if(Mine[1][8].num==1)
nNUM++;
}
else
if(i==9&&j==0)/*左下角格子的统计*/
{
if(Mine[8][0].num==1)
nNUM++;
if(Mine[9][1].num==1)
nNUM++;
if(Mine[8][1].num==1)
nNUM++;
}
else
if(i==9&&j==9)/*右下角格子的统计*/
{
if(Mine[9][8].num==1)
nNUM++;
if(Mine[8][9].num==1)
nNUM++;
if(Mine[8][8].num==1)
nNUM++;
}
else if(j==0)/*左边第一列格子的统计*/
{
if(Mine[i][j+1].num==1)
nNUM++;
if(Mine[i+1][j].num==1)
nNUM++;
if(Mine[i-1][j].num==1)
nNUM++;
if(Mine[i-1][j+1].num==1)
nNUM++;
if(Mine[i+1][j+1].num==1)
nNUM++;
}
else if(j==9)/*右边第一列格子的统计*/
{
if(Mine[i][j-1].num==1)
nNUM++;
if(Mine[i+1][j].num==1)
nNUM++;
if(Mine[i-1][j].num==1)
nNUM++;
if(Mine[i-1][j-1].num==1)
nNUM++;
if(Mine[i+1][j-1].num==1)
nNUM++;
}
else if(i==0)/*第一行格子的统计*/
{
if(Mine[i+1][j].num==1)
nNUM++;
if(Mine[i][j-1].num==1)
nNUM++;
if(Mine[i][j+1].num==1)
nNUM++;
if(Mine[i+1][j-1].num==1)
nNUM++;
if(Mine[i+1][j+1].num==1)
nNUM++;
}
else if(i==9)/*最后一行格子的统计*/
{
if(Mine[i-1][j].num==1)
nNUM++;
if(Mine[i][j-1].num==1)
nNUM++;
if(Mine[i][j+1].num==1)
nNUM++;
if(Mine[i-1][j-1].num==1)
nNUM++;
if(Mine[i-1][j+1].num==1)
nNUM++;
}
else/*普通格子的统计*/
{
if(Mine[i-1][j].num==1)
nNUM++;
if(Mine[i-1][j+1].num==1)
nNUM++;
if(Mine[i][j+1].num==1)
nNUM++;
if(Mine[i+1][j+1].num==1)
nNUM++;
if(Mine[i+1][j].num==1)
nNUM++;
if(Mine[i+1][j-1].num==1)
nNUM++;
if(Mine[i][j-1].num==1)
nNUM++;
if(Mine[i-1][j-1].num==1)
nNUM++;
}
return(nNUM);/*把格子周围一共有多少雷数的统计结果返回*/
}
int ShowWhite(int i,int j)/*显示无雷区的空白部分*/
{
if(Mine[i][j].flag==1||Mine[i][j].num==0)/*如果有红旗或该格处理过就不对该格进行任何判断*/
return;
mineNUM--;/*显示过数字或者空格的格子就表示多处理了一个格子,当所有格子都处理过了表示胜利*/
if(Mine[i][j].roundnum==0&&Mine[i][j].num!=1)/*显示空格*/
{
DrawEmpty(i,j,1,7);
Mine[i][j].num=0;
}
else
if(Mine[i][j].roundnum!=0)/*输出雷数*/
{
DrawEmpty(i,j,0,8);
sprintf(randmineNUM,"%d",Mine[i][j].roundnum);
setcolor(RED);
outtextxy(195+j*20,95+i*20,randmineNUM);
Mine[i][j].num=0;/*已经输出雷数的格子用0表示已经用过这个格子*/
return ;
}
/*8个方向递归显示所有的空白格子*/
if(i!=0&&Mine[i-1][j].num!=1)
ShowWhite(i-1,j);
if(i!=0&&j!=9&&Mine[i-1][j+1].num!=1)
ShowWhite(i-1,j+1);
if(j!=9&&Mine[i][j+1].num!=1)
ShowWhite(i,j+1);
if(j!=9&&i!=9&&Mine[i+1][j+1].num!=1)
ShowWhite(i+1,j+1);
if(i!=9&&Mine[i+1][j].num!=1)
ShowWhite(i+1,j);
if(i!=9&&j!=0&&Mine[i+1][j-1].num!=1)
ShowWhite(i+1,j-1);
if(j!=0&&Mine[i][j-1].num!=1)
ShowWhite(i,j-1);
if(i!=0&&j!=0&&Mine[i-1][j-1].num!=1)
ShowWhite(i-1,j-1);
}
void GamePlay(void)/*游戏过程*/
{
int i,j,Num;/*Num用来接收统计函数返回一个格子周围有多少地雷*/
for(i=0;i<10;i++)
for(j=0;j<10;j++)
Mine[i][j].roundnum=MineStatistics(i,j);/*统计每个格子周围有多少地雷*/
while(!kbhit())
{
if(LeftPress())/*鼠标左键盘按下*/
{
MouseGetXY();
if(MouseX>280&&MouseX<300&&MouseY>65&&MouseY<85)/*重新来*/
{
MouseOff();
gameAGAIN=1;
break;
}
if(MouseX>190&&MouseX<390&&MouseY>90&&MouseY<290)/*当前鼠标位置在格子范围内*/
{
j=(MouseX-190)/20;/*x坐标*/
i=(MouseY-90)/20;/*y坐标*/
if(Mine[i][j].flag==1)/*如果格子有红旗则左键无效*/
continue;
if(Mine[i][j].num!=0)/*如果格子没有处理过*/
{
if(Mine[i][j].num==1)/*鼠标按下的格子是地雷*/
{
MouseOff();
GameOver();/*游戏失败*/
break;
}
else/*鼠标按下的格子不是地雷*/
{
MouseOff();
Num=MineStatistics(i,j);
if(Num==0)/*周围没地雷就用递归算法来显示空白格子*/
ShowWhite(i,j);
else/*按下格子周围有地雷*/
{
sprintf(randmineNUM,"%d",Num);/*输出当前格子周围的雷数*/
setcolor(RED);
outtextxy(195+j*20,95+i*20,randmineNUM);
mineNUM--;
}
MouseOn();
Mine[i][j].num=0;/*点过的格子周围雷数的数字变为0表示这个格子已经用过*/
if(mineNUM<1)/*胜利了*/
{
GameWin();
break;
}
}
}
}
}
if(RightPress())/*鼠标右键键盘按下*/
{
MouseGetXY();
if(MouseX>190&&MouseX<390&&MouseY>90&&MouseY<290)/*当前鼠标位置在格子范围内*/
{
j=(MouseX-190)/20;/*x坐标*/
i=(MouseY-90)/20;/*y坐标*/
MouseOff();
if(Mine[i][j].flag==0&&Mine[i][j].num!=0)/*本来没红旗现在显示红旗*/
{
DrawRedflag(i,j);
Mine[i][j].flag=1;
}
else
if(Mine[i][j].flag==1)/*有红旗标志再按右键就红旗消失*/
{
DrawEmpty(i,j,0,8);
Mine[i][j].flag=0;
}
}
MouseOn();
sleep(1);
}
}
}

❽ C语言扫雷算法，也可以别的语言，解释清楚算法就好

在这上面不好说明, 我有C的代码, 你看一下(DEVC++)

#include<stdio.h>
#include<stdlib.h>
#include<time.h>
#include<windows.h>

#definen15
intrestart=0;
intlast_sel_x,last_sel_y;
charin[20];

structPOINT
{
	intx;
	inty;
}pt;

//设置CMD窗口光标位置
voidsetxy(intx,inty)
{
COORDcoord={x,y};
SetConsoleCursorPosition(GetStdHandle(STD_OUTPUT_HANDLE),coord);
}
//获取当前CMD当前光标所在位置
voidgetxy()
{
	HANDLEhConsole=GetStdHandle(STD_OUTPUT_HANDLE);
COORDcoordScreen={0,0};//光标位置
CONSOLE_SCREEN_BUFFER_INFOcsbi;
if(GetConsoleScreenBufferInfo(hConsole,&csbi))
{
//printf("光标坐标:(%d,%d)
",csbi.dwCursorPosition.X,csbi.dwCursorPosition.Y);
	pt.x=csbi.dwCursorPosition.X;
	pt.y=csbi.dwCursorPosition.Y;
}
}

structA
{
	intvalue;//-1为雷
	intstate;//显示状态:0为未打开,1为已打开
	intlock;//锁定状态
	intbomb;//雷已标记:0为未标记,1为已标记
};
structAs[10][10];

intcalc()
{
	inti,j,count=0;
	for(i=0;i<10;i++)
	{
		for(j=0;j<10;j++)
		{
			if(s[i][j].state==0)count++;
		}
	}
	returncount;
}

intprt()
{
	system("cls");
	intcount=calc();
	inti,j;
	
	printf("%3c",'');
	SetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
FOREGROUND_GREEN);
	for(i=0;i<10;i++)
	{
		printf("%3d",i);
	}
	SetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
FOREGROUND_RED|FOREGROUND_GREEN|FOREGROUND_BLUE);
	for(i=0;i<10;i++)
	{
		printf("
");
		SetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
FOREGROUND_GREEN);
		printf("%3d",i);
		SetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
FOREGROUND_RED|FOREGROUND_GREEN|FOREGROUND_BLUE);
		for(j=0;j<10;j++)
		{
			if(s[i][j].bomb==1)
			{
				SetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
FOREGROUND_RED);
				printf("%3c",'*');
				SetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
FOREGROUND_RED|FOREGROUND_GREEN|FOREGROUND_BLUE);
			}
			elseif(s[i][j].state==1)
			{
				if(s[i][j].value==0)printf("%3c",'');
				elseprintf("%3d",s[i][j].value);
			}
			else
			{
				printf("%3c",'-');
			}
		/*	if(s[i][j].value==-1)	printf("%3c",'*');
			elseprintf("%3d",s[i][j].value);*/
		}
		SetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
FOREGROUND_GREEN);
		printf("%3d",i);
		SetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
FOREGROUND_RED|FOREGROUND_GREEN|FOREGROUND_BLUE);
	}
	printf("
");
	printf("%3c",'');
	SetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
FOREGROUND_GREEN);
	for(i=0;i<10;i++)
	{
		printf("%3d",i);
	}
	SetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
FOREGROUND_RED|FOREGROUND_GREEN|FOREGROUND_BLUE);
	printf("
");
	
	getxy();
	setxy(45,0);
	printf("%d",count);
	setxy(40,5);
	printf("说明");
	setxy(40,7);
	printf("1:输入*xy(如:*55),则把第5行第5列");
	setxy(40,8);
	printf("标记为地雷");
	setxy(40,10);
	printf("2:输入xy(如55),则把第5行第5列打开");
	if(count==n)
	{
		for(i=0;i<10;i++)
		{
			for(j=0;j<10;j++)
			{
				if(s[i][j].value==-1&&s[i][j].bomb==0)s[i][j].bomb=1;
				if(s[i][j].value!=-1&&s[i][j].state==0)s[i][j].state=1;
			}
		}
		setxy(50,2);
		printf("success!");
		setxy(pt.x,pt.y);
		fflush(stdin);
		getchar();
		return1;
	}
	setxy(pt.x,pt.y);
	return0;
}
voidspace_process(intx,inty)
{
	inti,j;
	if(x-1>=0&&y-1>=0)
	{
		if(s[x-1][y-1].value==0&&s[x-1][y-1].lock==0){s[x-1][y-1].state=1;s[x-1][y-1].lock=1;space_process(x-1,y-1);}
		elseif(s[x-1][y-1].value!=-1)s[x-1][y-1].state=1;
	}
	if(x-1>=0)
	{
		if(s[x-1][y].value==0&&s[x-1][y].lock==0){s[x-1][y].state=1;s[x-1][y].lock=1;space_process(x-1,y);}
		elseif(s[x-1][y].value!=-1)s[x-1][y].state=1;
	}
	if(x-1>=0&&y+1<10)
	{
		if(s[x-1][y+1].value==0&&s[x-1][y+1].lock==0){s[x-1][y+1].state=1;s[x-1][y+1].lock=1;space_process(x-1,y+1);}
		elseif(s[x-1][y+1].value!=-1)s[x-1][y+1].state=1;
	}
	if(y-1>=0)
	{
		if(s[x][y-1].value==0&&s[x][y-1].lock==0){s[x][y-1].state=1;s[x][y-1].lock=1;space_process(x,y-1);}
		elseif(s[x][y-1].value!=-1)s[x][y-1].state=1;
	}
	if(y+1<10)
	{
		if(s[x][y+1].value==0&&s[x][y+1].lock==0){s[x][y+1].state=1;s[x][y+1].lock=1;space_process(x,y+1);}
		elseif(s[x][y+1].value!=-1)s[x][y+1].state=1;
	}
	if(x+1<10&&y-1>=0)
	{
		if(s[x+1][y-1].value==0&&s[x+1][y-1].lock==0){s[x+1][y-1].state=1;s[x+1][y-1].lock=1;space_process(x+1,y-1);}
		elseif(s[x+1][y-1].value!=-1)s[x+1][y-1].state=1;
	}
	if(x+1<10)
	{
		if(s[x+1][y].value==0&&s[x+1][y].lock==0){s[x+1][y].state=1;s[x+1][y].lock=1;space_process(x+1,y);}
		elseif(s[x+1][y].value!=-1)s[x+1][y].state=1;
	}
	if(x+1<10&&y+1<10)
	{
		if(s[x+1][y+1].value==0&&s[x+1][y+1].lock==0){s[x+1][y+1].state=1;s[x+1][y+1].lock=1;space_process(x+1,y+1);}
		elseif(s[x+1][y+1].value!=-1)s[x+1][y+1].state=1;
	}
}

intprocess_char(char*t,int*i,int*j)
{
	intlen=strlen(t);
	intx,y=0;
	for(x=0;x<len;x++)
	{
		if(t[x]=='')
		{
			continue;
		}
		else
		{
			t[y++]=t[x];
		}
	}
	t[y]='';
	if(t[0]=='*')
	{
		*i=t[1]-'0';
		*j=t[2]-'0';
		if(s[*i][*j].bomb==1)
		{
			s[*i][*j].bomb=0;
			s[*i][*j].state=0;
		}
		elseif(s[*i][*j].bomb==0&&s[*i][*j].state==0)
		{
			s[*i][*j].bomb=1;
		}
		return1;
	}
	elseif(t[0]>='0'&&t[0]<='9')
	{
		*i=t[0]-'0';
		*j=t[1]-'0';
		return0;
	}
	return1;
}

intplus(intx,inty)//返回0为出错，返回1为正确，返回-1为取消
{
	intcount=s[x][y].value;
	intbomb=0;
	if(count==0||count==-1)return-1;
	if(x-1>=0&&y-1>=0)
	{
		if(s[x-1][y-1].bomb==1)bomb++;
	}
	if(x-1>=0)
	{
		if(s[x-1][y].bomb==1)bomb++;
	}
	if(x-1>=0&&y+1<10)
	{
		if(s[x-1][y+1].bomb==1)bomb++;
	}
	if(y-1>=0)
	{
		if(s[x][y-1].bomb==1)bomb++;
	}
	if(y+1<10)
	{
		if(s[x][y+1].bomb==1)bomb++;
	}
	if(x+1<10&&y-1>=0)
	{
		if(s[x+1][y-1].bomb==1)bomb++;
	}
	if(x+1<10)
	{
		if(s[x+1][y].bomb==1)bomb++;
	}
	if(x+1<10&&y+1<10)
	{
		if(s[x+1][y+1].bomb==1)bomb++;
	}
	if(bomb==s[x][y].value)
	{
		if(x-1>=0&&y-1>=0)
		{
			if(s[x-1][y-1].value==-1&&s[x-1][y-1].bomb==0){return0;}
		}
		if(x-1>=0)
		{
			if(s[x-1][y].value==-1&&s[x-1][y].bomb==0)return0;
		}
		if(x-1>=0&&y+1<10)
		{
			if(s[x-1][y+1].value==-1&&s[x-1][y+1].bomb==0)return0;
		}
		if(y-1>=0)
		{
			if(s[x][y-1].value==-1&&s[x][y-1].bomb==0)return0;
		}
		if(y+1<10)
		{
			if(s[x][y+1].value==-1&&s[x][y+1].bomb==0)return0;
		}
		if(x+1<10&&y-1>=0)
		{
			if(s[x+1][y-1].value==-1&&s[x+1][y-1].bomb==0)return0;
		}
		if(x+1<10)
		{
			if(s[x+1][y].value==-1&&s[x+1][y].bomb==0)return0;
		}
		if(x+1<10&&y+1<10)
		{
			if(s[x+1][y+1].value==-1&&s[x+1][y+1].bomb==0)return0;
		}
		space_process(x,y);
		inti,j;
		for(i=0;i<10;i++)
		{
			for(j=0;j<10;j++)
			{
				s[i][j].lock=0;
			}
		}
		return1;
	}
	else
	{
		return-1;
	}
}
voidprt_selected(intx,inty,intflag)
{
	if(flag==0)
	{
		if(x>=0)x=last_sel_x;
		if(y>=0)y=last_sel_y;
	}
	intplus=2;
	getxy();
	if(x>=0)
	{
		last_sel_x=x;
		setxy(3,x+1);
		intj;
		if(flag==1)	SetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),BACKGROUND_BLUE|FOREGROUND_INTENSITY);
		elseSetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
FOREGROUND_RED|FOREGROUND_GREEN|FOREGROUND_BLUE);
		for(j=0;j<10;j++)
		{
		if(s[x][j].bomb==1)
			{
				if(flag==1)	SetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
	FOREGROUND_RED|BACKGROUND_BLUE);
		elseSetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
FOREGROUND_RED|FOREGROUND_GREEN|FOREGROUND_BLUE);
				printf("%3c",'*');
			}
			elseif(s[x][j].state==1)
			{
				if(s[x][j].value==0)printf("%3c",'');
				elseprintf("%3d",s[x][j].value);
			}
			else
			{
				printf("%3c",'-');
			}
		}
		SetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
FOREGROUND_RED|FOREGROUND_GREEN|FOREGROUND_BLUE);
	}
	if(y>=0)
	{
		inti;
		last_sel_y=y;
		for(i=0;i<10;i++)
		{
			if(last_sel_x==i)	continue;
			if(flag==1)	SetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),BACKGROUND_BLUE|FOREGROUND_INTENSITY);
			elseSetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
FOREGROUND_RED|FOREGROUND_GREEN|FOREGROUND_BLUE);
			setxy(3*y+3,i+1);
			if(s[i][y].bomb==1)
			{
				if(flag==1)	SetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
		FOREGROUND_RED|BACKGROUND_BLUE);
		elseSetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
FOREGROUND_RED|FOREGROUND_GREEN|FOREGROUND_BLUE);
				printf("%3c",'*');
			}
			elseif(s[i][y].state==1)
			{
				if(s[i][y].value==0)printf("%3c",'');
				elseprintf("%3d",s[i][y].value);
			}
			else
			{
				printf("%3c",'-');
			}
		}
		
	}
	SetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
FOREGROUND_RED|FOREGROUND_GREEN|FOREGROUND_BLUE);
	setxy(pt.x,pt.y);
}

voidinput()//实时获取键盘输入
{
	intc;
	intx=-1,y=-1;
	inti=0;
	intfirst_num=0;
	while(1)
	{
		fflush(stdin);
		c=getch();
		printf("%c",c);
		if(c==10||c==13)	break;
		if(c==8&&i>0)
		{
			in[i-1]='';
			if(in[0]=='*')
			{
				if(in[1]<'0'||in[1]>'9')
				{
					x=-1;
					prt_selected(last_sel_x,-1,0);
				}
				if(in[2]<'0'||in[2]>'9')
				{
					y=-1;
					prt_selected(-1,last_sel_y,0);
				}
			}
			else
			{
				if(in[0]<'0'||in[0]>'9')
				{
					x=-1;
					prt_selected(last_sel_x,-1,0);
				}
				if(in[1]<'0'||in[1]>'9')
				{
					y=-1;
					prt_selected(-1,last_sel_y,0);
				}
			}
			i--;
			getxy();
			setxy(pt.x,pt.y);
			printf("");
			setxy(pt.x,pt.y);
		}
		elseif(c=='*'||(c>='0'&&c<='9'))
		{
			in[i++]=c;
			if(in[0]=='*')
			{
				if(in[1]!=''&&in[1]>='0'&&in[1]<='9')
				{
					x=in[1]-'0';
				}
				else
				{
					x=-1;
				}
				if(in[2]!=''&&in[2]>='0'&&in[2]<='9')
				{
					y=in[2]-'0';
				}
				else
				{
					y=-1;
				}

			}
			elseif(in[0]>='0'&&in[0]<='9')
			{
				x=in[0]-'0';
				if(in[1]>='0'&&in[1]<='9')
				{
					y=in[1]-'0';
				}
				else
				{
					y=-1;
				}
			}
			elsex=-1;
			if(x>-1)prt_selected(x,-1,1);
			if(y>-1)prt_selected(-1,y,1);
		}
	}
}

intmain()
{
	inti=0,j,x,y;
	
	while(1)
	{
		restart=0;
		for(i=0;i<10;i++)
		{
			for(j=0;j<10;j++)
			{
				s[i][j].value=0;
				s[i][j].state=0;
				s[i][j].lock=0;
				s[i][j].bomb=0;
			}
		}
		srand((unsigned)time(0));
		i=0;
		while(i<n)
		{
			x=rand()%10;
			y=rand()%10;
			if(s[x][y].value!=-1)
			{
				s[x][y].value=-1;
				i++;
			}
		}
		for(i=0;i<10;i++)
		{
			for(j=0;j<10;j++)
			{
				if(s[i][j].value==-1)	continue;
			//	n=0;
				if(i-1>=0)
				{
					if(s[i-1][j].value==-1)	s[i][j].value++;
					if(j-1>=0)
					{
						if(s[i-1][j-1].value==-1)	s[i][j].value++;
					}
					if(j+1<10)
					{
						if(s[i-1][j+1].value==-1)	s[i][j].value++;
					}
				}
				if(i+1<10)
				{
					if(s[i+1][j].value==-1)	s[i][j].value++;
					if(j-1>=0)
					{
						if(s[i+1][j-1].value==-1)	s[i][j].value++;
					}
					if(j+1<10)
					{
						if(s[i+1][j+1].value==-1)	s[i][j].value++;
					}
				}
				if(j-1>=0)
				{
					if(s[i][j-1].value==-1)	s[i][j].value++;
				}
				if(j+1<10)
				{
					if(s[i][j+1].value==-1)	s[i][j].value++;
				}
			}
		}
		if(prt()==1)
		{
			restart=1;
			continue;
		}
		
		while(1)
		{
			memset(in,'',20);
			fflush(stdin);
		//	scanf("%[^
]",in);
			input();
			if(process_char(in,&i,&j)==1)
			{
				if(prt()==1)
				{
					restart=1;
					break;
				}
				continue;
			}
			for(x=0;x<10;x++)
			{
				for(y=0;y<10;y++)
				{
					s[x][y].lock=0;
				}
			}
			if(s[i][j].value==-1)
			{
				printf("
Bomb");
				fflush(stdin);
				getchar();
				restart=1;
			}
			elseif(s[i][j].value==0)
			{
				s[i][j].state=1;
				space_process(i,j);
			}
			elseif(s[i][j].state==1)
			{
				intre=plus(i,j);
				{
					switch(re)
					{
						case-1:
							break;
						case0:
							printf("
Bomb");
							fflush(stdin);
							getchar();
							restart=1;
							break;
						case1:break;
					}
				}
			}
			else
			{
				s[i][j].state=1;
			}
			if(prt()==1||restart==1)
			{
				restart=0;
				break;
			}
		}
	}
	return0;
}

❾ C语言扫雷游戏源代码

"扫雷"小游戏C代码

#include<stdio.h>
#include<math.h>
#include<time.h>
#include<stdlib.h>
main( )
{char a[102][102],b[102][102],c[102][102],w;
int i,j; /*循环变量*/
int x,y,z[999]; /*雷的位置*/
int t,s; /*标记*/
int m,n,lei; /*计数*/
int u,v; /*输入*/
int hang,lie,ge,mo; /*自定义变量*/
srand((int)time(NULL)); /*启动随机数发生器*/
leb1: /*选择模式*/
printf(" 请选择模式： 1.标准 2.自定义 ");
scanf("%d",&mo);
if(mo==2) /*若选择自定义模式，要输入三个参数*/
{do
{t=0; printf("请输入 行数 列数 雷的个数 ");
scanf("%d%d%d",&hang,&lie,&ge);
if(hang<2){printf("行数太少 "); t=1;}
if(hang>100){printf("行数太多 ");t=1;}
if(lie<2){printf("列数太少 ");t=1;}
if(lie>100){printf("列数太多 ");t=1;}
if(ge<1){printf("至少要有一个雷 ");t=1;}
if(ge>=(hang*lie)){printf("雷太多了 ");t=1;}
}while(t==1);
}
else{hang=10,lie=10,ge=10;} /*否则就是选择了标准模式(默认参数)*/
for(i=1;i<=ge;i=i+1) /*确定雷的位置*/
{do
{t=0; z[i]=rand( )%(hang*lie);
for(j=1;j<i;j=j+1){if(z[i]==z[j]) t=1;}
}while(t==1);
}
for(i=0;i<=hang+1;i=i+1) /*初始化a,b,c*/
{for(j=0;j<=lie+1;j=j+1) {a[i][j]='1'; b[i][j]='1'; c[i][j]='0';} }
for(i=1;i<=hang;i=i+1)
{for(j=1;j<=lie;j=j+1) {a[i][j]='+';} }
for(i=1;i<=ge;i=i+1) /*把雷放入c*/
{x=z[i]/lie+1; y=z[i]%lie+1; c[x][y]='#';}
for(i=1;i<=hang;i=i+1) /*计算b中数字*/
{for(j=1;j<=lie;j=j+1)
{m=48;
if(c[i-1][j-1]=='#')m=m+1; if(c[i][j-1]=='#')m=m+1;
if(c[i-1][j]=='#')m=m+1; if(c[i+1][j+1]=='#')m=m+1;
if(c[i][j+1]=='#')m=m+1; if(c[i+1][j]=='#')m=m+1;
if(c[i+1][j-1]=='#')m=m+1; if(c[i-1][j+1]=='#')m=m+1;
b[i][j]=m;
}
}
for(i=1;i<=ge;i=i+1) /*把雷放入b中*/
{x=z[i]/lie+1; y=z[i]%lie+1; b[x][y]='#';}

lei=ge; /*以下是游戏设计*/
do
{leb2: /*输出*/
system("cls");printf(" ");

printf(" ");
for(i=1;i<=lie;i=i+1)
{w=(i-1)/10+48; printf("%c",w);
w=(i-1)%10+48; printf("%c ",w);
}
printf(" |");
for(i=1;i<=lie;i=i+1){printf("---|");}
printf(" ");
for(i=1;i<=hang;i=i+1)
{w=(i-1)/10+48; printf("%c",w);
w=(i-1)%10+48; printf("%c |",w);
for(j=1;j<=lie;j=j+1)
{if(a[i][j]=='0')printf(" |");
else printf(" %c |",a[i][j]);
}
if(i==2)printf(" 剩余雷个数");
if(i==3)printf(" %d",lei);
printf(" |");
for(j=1;j<=lie;j=j+1){printf("---|");}
printf(" ");
}

scanf("%d%c%d",&u,&w,&v); /*输入*/
u=u+1,v=v+1;
if(w!='#'&&a[u][v]=='@')
goto leb2;
if(w=='#')
{if(a[u][v]=='+'){a[u][v]='@'; lei=lei-1;}
else if(a[u][v]=='@'){a[u][v]='?'; lei=lei+1;}
else if(a[u][v]=='?'){a[u][v]='+';}
goto leb2;
}
a[u][v]=b[u][v];

leb3: /*打开0区*/
t=0;
if(a[u][v]=='0')
{for(i=1;i<=hang;i=i+1)
{for(j=1;j<=lie;j=j+1)
{s=0;
if(a[i-1][j-1]=='0')s=1; if(a[i-1][j+1]=='0')s=1;
if(a[i-1][j]=='0')s=1; if(a[i+1][j-1]=='0')s=1;
if(a[i+1][j+1]=='0')s=1; if(a[i+1][j]=='0')s=1;
if(a[i][j-1]=='0')s=1; if(a[i][j+1]=='0')s=1;
if(s==1)a[i][j]=b[i][j];
}
}
for(i=1;i<=hang;i=i+1)
{for(j=lie;j>=1;j=j-1)
{s=0;
if(a[i-1][j-1]=='0')s=1; if(a[i-1][j+1]=='0')s=1;
if(a[i-1][j]=='0')s=1; if(a[i+1][j-1]=='0')s=1;
if(a[i+1][j+1]=='0')s=1; if(a[i+1][j]=='0')s=1;
if(a[i][j-1]=='0')s=1; if(a[i][j+1]=='0')s=1;
if(s==1)a[i][j]=b[i][j];
}
}
for(i=hang;i>=1;i=i-1)
{for(j=1;j<=lie;j=j+1)
{s=0;
if(a[i-1][j-1]=='0')s=1; if(a[i-1][j+1]=='0')s=1;
if(a[i-1][j]=='0')s=1; if(a[i+1][j-1]=='0')s=1;
if(a[i+1][j+1]=='0')s=1; if(a[i+1][j]=='0')s=1;
if(a[i][j-1]=='0')s=1; if(a[i][j+1]=='0')s=1;
if(s==1)a[i][j]=b[i][j];
}
}
for(i=hang;i>=1;i=i-1)
{for(j=lie;j>=1;j=j-1)
{s=0;
if(a[i-1][j-1]=='0')s=1; if(a[i-1][j+1]=='0')s=1;
if(a[i-1][j]=='0')s=1; if(a[i+1][j-1]=='0')s=1;
if(a[i+1][j+1]=='0')s=1;if(a[i+1][j]=='0')s=1;
if(a[i][j-1]=='0')s=1; if(a[i][j+1]=='0')s=1;
if(s==1)a[i][j]=b[i][j];
}
}

for(i=1;i<=hang;i=i+1) /*检测0区*/
{for(j=1;j<=lie;j=j+1)
{if(a[i][j]=='0')
{if(a[i-1][j-1]=='+'||a[i-1][j-1]=='@'||a[i-1][j-1]=='?')t=1;
if(a[i-1][j+1]=='+'||a[i-1][j+1]=='@'||a[i-1][j+1]=='?')t=1;
if(a[i+1][j-1]=='+'||a[i+1][j-1]=='@'||a[i+1][j-1]=='?')t=1;
if(a[i+1][j+1]=='+'||a[i+1][j+1]=='@'||a[i+1][j+1]=='?')t=1;
if(a[i+1][j]=='+'||a[i+1][j]=='@'||a[i+1][j]=='?')t=1;
if(a[i][j+1]=='+'||a[i][j+1]=='@'||a[i][j+1]=='?')t=1;
if(a[i][j-1]=='+'||a[i][j-1]=='@'||a[i][j-1]=='?')t=1;
if(a[i-1][j]=='+'||a[i-1][j]=='@'||a[i-1][j]=='?')t=1;
}
}
}
if(t==1)goto leb3;
}

n=0; /*检查结束*/
for(i=1;i<=hang;i=i+1)
{for(j=1;j<=lie;j=j+1)
{if(a[i][j]!='+'&&a[i][j]!='@'&&a[i][j]!='?')n=n+1;}
}
}
while(a[u][v]!='#'&&n!=(hang*lie-ge));

for(i=1;i<=ge;i=i+1) /*游戏结束*/
{x=z[i]/lie+1; y=z[i]%lie+1; a[x][y]='#'; }
printf(" ");
for(i=1;i<=lie;i=i+1)
{w=(i-1)/10+48; printf("%c",w);
w=(i-1)%10+48; printf("%c ",w);
}
printf(" |");
for(i=1;i<=lie;i=i+1){printf("---|");}
printf(" ");
for(i=1;i<=hang;i=i+1)
{w=(i-1)/10+48; printf("%c",w);
w=(i-1)%10+48; printf("%c |",w);
for(j=1;j<=lie;j=j+1)
{if(a[i][j]=='0')printf(" |");
else printf(" %c |",a[i][j]);
}
if(i==2)printf(" 剩余雷个数");
if(i==3)printf(" %d",lei); printf(" |");
for(j=1;j<=lie;j=j+1) {printf("---|");}
printf(" ");
}
if(n==(hang*lie-ge)) printf("你成功了! ");
else printf(" 游戏结束! ");
printf(" 重玩请输入1 ");
t=0;
scanf("%d",&t);
if(t==1)goto leb1;
}

/*注：在DEV c++上运行通过。行号和列号都从0开始，比如要确定第0行第9列不是“雷”，就在0和9中间加入一个字母，可以输入【0a9】三个字符再按回车键。3行7列不是雷，则输入【3a7】回车；第8行第5列是雷，就输入【8#5】回车，9行0列是雷则输入【9#0】并回车*/

❿ C语言扫雷怎么实现

点击（x,y）
{
如果（x,y）格子不存在，return
如果是炸弹，GG
如果已经翻开，return
如果周围有雷，显示雷数量，并标记翻开

否则
{
显示空，并标记翻开
点击（x-1,y-1）....点击（x+1,y+1）共8个
}
}
基本思路是这样